IS210HD plus Pro LC


Overview . Details . Specifications

The IS210HDplus Pro LC is an affordable high performance 42” wide, 600 dpi large format scanner with 8-bit grayscale and 8-bit color capture capability, ideal for applications that require limited color. For GIS, mapping and document archiving applications, the IS210HDplus Pro LC 8-bit color is a practical choice. The IS210HDplus large format scanner can scan monochrome documents at a rate of 9ips and color documents at 3ips when the resolution is set at 400 dpi. The IS210HDplus Pro LC utilizes Contact Array Sensor technology for accurate, high-resolution scans. Requiring no warm-up time, this advanced technology eliminates optical distortion often experienced with common CCD technology. 
Details
IS210HDplus PRO LC Large Format Scanner

IS210HDplus PRO LC Large Format Scanner:
  • 8-bit color & monochrome scanner
  • 42" wide
  • 600dpi true optical resolution
  • Interpolated resolution up to 4800dpi
  • ±0.1% (or ±5 pixels) scan accuracy
  • USB2/Ethernet communication ports
  • Compact design
  • Contact Image Sensor (CIS) Technology

Specifications
Parameters
 IS210HDplus PRO LC
Document sizes
ANSI E to ISO A4
Effective scanning area
1,092 mm (43 inches)
Guaranteed scanning
precision range
Width: 1,066.8mm (42 inches ) ( centered )
Length: 16 m ( maximum )
762 mm ( 30 inches ) or less if the document thickness exceeds 1.5 mm. (0.06 inches)

2,060 mm ( 81.1 inches ) when the optical Document scanning table is used.
Document thickness
 1.5mm (0.06 inches) or less (including the carrier sheet)
Optical resolution
 600 dpi
Interpolated resolution
 50 to 9600 dpi, in 1-dpi increments
Main scanning system
 Contact image sensor system
(Five A4 sensors in a zigzag pattern)
Sub scanning system
 Document travel (sheet through) system
Scanning precision
 ±0.1%
Threshold value
 Automatic threshold settings by DSP during monochrome mode
Gradation
 Gray : 256 shades , Color : 8-bit,
Bi-level, intermediate tones (dithering, error diffusion)
Light source
 LED
Output
 Image data
Scanning speed
When the document thickness is 1.5 mm (0.06 inches) or less ( 400 dpi,ISO A0 )
IS210HDplus PRO LC
High-speed scan
 Monochrome 8s
Gray 16s
8bit Color 16s
Normal scan Monochrome  13s
Gray 19s
8bit Color 19s

Specifications are subject to change without notice.
All trademarks acknowledged as properties of their respective owners

Footnotes
*1 Documents up to approx. 52.5 ft. in length (driver software limitation) can be scanned. However, the actual document length that can be scanned is limited by the available memory (hard disk or other data storage device) of the computer to which the scanner is connected, and also by the grade of the medium being scanned.
*2 Notes on scanning precision
Scanning precision may vary slightly depending on the grade and thickness of the medium being scanned, and on the operating conditions. The precision figures above were measured under the operating conditions described below.
* Test chart used: Mylar sheet #200
* Ambient conditions: Temperature: 68° ± 3°F; Humidity: 60% ±10% RH
*3 Excluding data transfer time.
*4 The USB 2.0 and IEEE 1394 interfaces cannot be used at the same time

Standard Accessories
Power cable 1
Calibration / Color correction sheets (ISO0913) 1 set
Carrier sheet (ISO907) 1
User's manual, Scanning Master 21+ driver 1 set
Document support wires 3
Cleaning paper 1 pack